How to Install and Configure Kubernetes on Ubuntu?
Last Updated :
21 Aug, 2024
Kubernetes is open-source software that helps to solve problems related to container-based software automation. It is like a container based system, which helps to distribute out the work that needs to be executed while testing software. Kubernetes are portable in nature. That is why it is widely used throughout the globe. Basically, it helps the deployment of any new build software for any new build software, there are certain requirements that need to be filled out by them. This work is done by the software testers. But the work of deploying a software is not a easy enough. For that purpose, testers take the help of Kubernetes. It breaks the software into small pieces, & after that, testing will be easier for that simple pieces. In this way, the overall process is completed.
Features of Kubernetes
- Kubernetes is extensive in nature. That means it can be used for other purposes of software development.
- Kubernetes helps to configure the software as well. As well as helping with the automation of the software.
- Kubernetes dependencies are highly useful. Kubernetes tools transporter and services are available, that help to cut down the workload for deploying any software.
Installation & Configuration of Kubernetes in Linux
Here we have to install some prerequisites for installing Kubernetes. These installations have to be done along with the installation of Kubernetes. These installations are part of its configuration.
Step 1: At first, we have to open the terminal Linux. Then we have to write the following command. This will help to install a transporter. The transporter is a component that is needed to install Kubernetes in the machine. Wait till the process is completed.
sudo apt-get install -y apt-transport-https
Set up Docker
Step 2: Now, it is time to install Docker. It is a necessary item that coordinates with the Kubernetes. If docker was installed previously in the machine, then there is no problem with the following command. The terminal will simply skip this command & move forward. But if the Docker is not present in the machine, then it will take some time for its installation.
sudo apt install docker.io
Step 3: Now after successful installing Docker on the machine, we have to start & enable it. Otherwise, it will not provide permission to install Kubernetes on the machine. We have to execute the below two commands.
sudo systemctl start docker
sudo systemctl enable docker
Note: If the docker is previously installed in the machine, there is no need to execute the Step 2 & Step 3. If Docker is installed in the machine & those steps are executed, then it will not create any fatal problem with the installation. But better prefer not to execute those steps.
Step 4: Now after successfully starting the Docker, it is time to install Curl in Linux. As Curl will help to run many dependencies with the Kubernetes. We have to run the following command this will install the Curl in the machine. Wait till the installation is completed.
sudo apt-get install curl
Note: There may be users who finds that installing of Curl along with Kubernetes is a waste of time. But it is a necessary one. Without Curl, installation of Kubernete will complete. But in future when they use Kubernetes they start malfunctioning. As Curl helps to auto-update Kubernetes. Without Curl Kubernetes can't update to latest version. As a result, it will gradually stop working.
Install Kubernetes
Install Kubernetes Tools
Step 5: Now it is time to install Kubernetes. Kubernetes is basically a combination of four dependencies. They are Kubelet, Kubeadm Kubectl, and Kubernetes. These dependencies are a combination of many other dependencies. We have to install these main dependencies. For that purpose, we have to execute the below-mentioned below mentioned command. This will help to install these dependencies.
sudo apt-get install -y kubelet kubeadm kubectl kubernetes-cni
Step 6: We have to wait for some time. As the installation of Kubernetes will take some time. The consumption of time may depend upon the speed & configuration of the machine.
Initialize Kubernetes on Master Node
Step 7: Now, we have installed Kubernetes. Along with this, we have configured the necessary parts of it. Now, it is time to configure & start Kubernetes in the machine. For that purpose, we have to run the following command. This command will initialize the Kubernetes in the machine. Wait till the process is completed.
sudo kubeadm init
Step 8: After completion of the above state, there will be a message displayed. That will state that the Control Panel of the Kubernetes has initialized. So, the Kubernetes has started working. Hence, the installation & configuration of Kubernetes is successfully completed.
Setting Up Kubernetes on Minikube: A Step-by-Step Guide for Ubuntu Users
Step 1: Update System and Install Required Packages
Ensure your system is up to date and update, upgrade the packages using the below commands. Refer the below images for your reference.
sudo apt-get update -y
sudo apt-get upgrade -y
Ensure your system is required necessary packages and download the necessary packages using the below commands. Refer the below images for your reference to install the necessary packaged.
sudo apt-get install curl
sudo apt-get install apt-transport-https
Step 2: Install VirtualBox Hypervisor
Install the VirtualBox hypervisor, required for running Minikube. Here is the command to download the virtual box in the machine.
sudo apt install virtualbox virtualbox-ext-pack
- sudo: This command stands for "superuser do" and is used to execute commands with elevated privileges. It allows regular users to perform administrative tasks.
- apt: This is the package manager for Debian-based Linux distributions like Ubuntu. It is used to install, remove, and manage software packages.
- install: This is the action that apt will perform. It tells apt to install the specified packages.
- virtualbox: This is the name of the package to be installed. VirtualBox is a powerful, cross-platform virtualization software that allows you to create and run virtual machines on your computer.
- virtualbox-ext-pack: This is an optional package that contains additional features and extensions for VirtualBox, such as support for USB 2.0 and 3.0 devices, VirtualBox Remote Desktop Protocol (VRDP) support, and more.
Step 3: Install Minikube
Download and install Minikube, a tool for running Kubernetes clusters locally. We need to install the minikube later steps here is the image for your reference.
wget https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64
This command uses wget, a command-line utility for downloading files from the internet, to fetch the latest Minikube binary specifically built for Linux with the AMD64 architecture. The URL https://storage.googleapis.com/minikube/releases/latest/minikube-linux-amd64 points to the latest Minikube release hosted on Google Cloud Storage. Once downloaded, this binary can be executed to install Minikube on a Linux system with an AMD64 processor architecture.
Copy the minikube file into /usr/local/bin. Below are the commands to copy the minikube and provide the sufficient permissions to the minikube file.
sudo cp minikube-linux-amd64 /usr/local/bin/minikube
sudo chmod 755 /usr/local/bin/minikube
Check the minikube version. Here is the command to check the minikube version. Refer the below image for your reference.
minikube version
Step 4: Install Kubectl
Install Kubectl, the command-line tool for interacting with Kubernetes clusters:
curl -LO https://storage.googleapis.com/kubernetes-release/release/`curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt`/bin/linux/amd64/kubectl
curl -s https://storage.googleapis.com/kubernetes-release/release/stable.txt: This inner curl command retrieves the latest stable version of Kubernetes from Google Cloud Storage by querying the stable.txt file, which contains the version number.- ``: This part of the command is enclosed in backticks, which allows the output of the inner
curl command (i.e., the Kubernetes version number) to be used as input for the outer curl command. curl -LO: This part of the command initiates a new curl request to download the kubectl binary.-L option tells curl to follow any redirects.-O option instructs curl to save the downloaded file with the same name as the remote file.
https://storage.googleapis.com/kubernetes-release/release/<version>/bin/linux/amd64/kubectl: This is the URL where the kubectl binary for Linux on AMD64 architecture is located. The <version> placeholder is replaced with the Kubernetes version obtained from the inner curl command.
Move the kubectl file into /usr/local/bin for instalation.
chmod +x ./kubectl
sudo mv ./kubectl /usr/local/bin/kubectl
Check the kubectl version in the json mode.
kubectl version -o json
Step 5: Start Minikube
Start Minikube to create and manage Kubernetes clusters locally.
minikube start
Managing Kubernetes with Minikube
Here are some common commands to manage your Minikube Kubernetes cluster:
Common Minikube Commands
View Kubernetes configuration of the minikube cluster.
kubectl config view
Access Minikube Dashboard
View cluster information by using the below command.
kubectl cluster-info
View nodes in the cluster of the minikube.
kubectl get nodes
View pods in the cluster of the minikube.
kubectl get pod
Check Minikube status on the minikube cluster.
minikube status
List Minikube addons by using the below command.
minikube addons list
Access Minikube Dashboard of the minikube cluster.
minikube dashboard
Access Minikube Dashboard URL. For your reference refer the below image.
minikube dashboard --url
People also Ask
Article | Read |
|---|
How To Deploy Kubernetes on CentOS? | Link |
Kubernetes – Installation Methods | Link |
Install and Set Up kubectl on Linux | Link |
Similar Reads
Kubernetes Tutorial Kubernetes is an open-source container management platform that automates the deployment, management, and scaling of container-based applications in different kinds of environments like physical, virtual, and cloud-native computing foundations. In this Kubernetes Tutorial, you are going to learn all
8 min read
Introduction to Kubernetes
Installation and Setup
Application Deployment
What are Kubernetes Containers?Kubernetes is an open-source container orchestration framework that was originally developed by Google. Container orchestration is automation. It can facilitate you to deploy the identical application across different environments like physical machines, virtual machines cloud environments, or perha
15 min read
Kubernetes - Introduction to Container OrchestrationIn this article, we will look into Container Orchestration in Kubernetes. But first, let's explore the trends that gave rise to containers, the need for container orchestration, and how that it has created the space for Kubernetes to rise to dominance and growth. The growth of technology into every
4 min read
Kubernetes - ImagesPre-requisite:- Kubernetes A container image is used to represent binary data that is being used to encapsulate an application and all its software dependencies. Container images can be represented as executable software bundles that run standalone and make very defined assumptions about their runti
3 min read
Kubernetes - JobsPre-requisite: Kubernetes In the Kubernetes world, jobs are considered an object to act as a supervisor or controllers of a task. The Kubernetes job will create a pod, monitor the task, and recreate another one if that pod fails for some reason. Upon completion of the task, it will terminate the pod
4 min read
Kubernetes - Labels & SelectorsAn open-source container management platform called Kubernetes automates the deployment, scaling, descaling, and load balancing of containers (also called a container orchestration tool). It was created by Google in Golang and has a sizable community as a result of that. Google eventually donated it
5 min read
Kubernetes - NamespacesKubernetes Namespace is a mechanism that enables you to organize resources. It is like a virtual cluster inside the cluster. A namespace isolates the resources from the resources of other namespaces. For example, You need to have different names for deployments/services in a namespace but you can ha
9 min read
Kubernetes - NodeKubernetes Nodes are the Worker or master machines where the actual work happens. Each Kubernetes node has the services required to execute Pods and is controlled by the Control Plane. Each Kubernetes Node can have multiple pods and pods have containers running inside them. 3 processes in every Node
13 min read
Kubernetes - NodePort ServiceNodePort service in Kubernetes is a service that is used to expose the application to the internet from where the end-users can access it. If you create a NodePort Service Kubernetes will assign the port within the range of (30000-32767). The application can be accessed by end-users using the node's
5 min read
Kubernetes - ClusterIP vs NodePort vs LoadBalancerThree main service types are used in Kubernetes networking: ClusterIP, NodePort, and LoadBalancer. Each has a specific function in controlling external access and service-to-service communication. Comprehending their distinctions is essential for efficiently coordinating applications. This article e
7 min read
Kubernetes - ServicesSoftware deployment, scaling, and management are all automated using Kubernetes, an open-source container orchestration system. K8s is another name for Kubernetes. Kubernetes was initially developed by Google and is now managed by the Cloud Native Computing Foundation. Despite the fact that it now s
3 min read
Kubernetes Pods: How to Create and Manage ThemKubernetes is an open-source container orchestration system mainly used for automated software deployment, management, and scaling. Kubernetes is also known as K8s. Kubernetes was originally developed by Google, but it is now being maintained by the Cloud Native Computing Foundation. It was original
13 min read
How to Run Shell Commands in Kubernetes Pods or ContainersIn Kubernetes, we create pods by adding an extra layer of information on containers. This Kubernetes in short is known as K8s, an open-source container orchestration tool developed by Google. It is used to orchestrate the containers for bringing Agility in software deployment through scaling, and ma
6 min read
Kubernetes - Creating Multiple Container in a PodPre-requisite:- Kubernetes Kubernetes is a container management tool and it automates container deployment, load balancing, and container scaling. It is open-source and developed by Google in 2014 and written in Golang. All cloud providers adopt Kubernetes. It is scheduled runs and manages isolated
3 min read
Kubernetes - Replication ControllerWith the help of the open-source container orchestration technology Kubernetes, software deployment, scalability, and management are mostly automated. Another name for Kubernetes is K8s. Google created Kubernetes, which is now overseen by the Cloud Native Computing Foundation. Even though it now wor
7 min read
Kuberneters - Difference Between Replicaset and Replication ControllerPre-requisite: Kubernetes Kubernetes is also known as K8s is an open-source container orchestration tool developed by google which is used for automating software deployment, scaling, and management. Currently, it is being maintained by the cloud native computing foundation(CNCF). K8s has two versio
4 min read
What is Kubernetes Deployment?Kubernetes is an open-source Container Management tool that automates container deployment, container scaling, descaling, and container load balancing (also called as container orchestration tool). It is written in Golang and has a huge community because it was first developed by Google and later do
10 min read
Configmaps
Kubernetes - ConfigMapsKubernetes allows you to run and manage applications in containers. However, when you need to update configurations like usernames, passwords, or URLs without modifying the application code, ConfigMaps provide an efficient solution. ConfigMaps separate application configuration from the application
10 min read
Kubernetes - Create Config Map From FilesPre-requisite: Kubernetes While creating a manifest file in Kubernetes, we can define environment variables. However, when you have a lot of manifest files, it will become difficult to manage the environment data stored in various manifest files. To overcome this issue, we can manage environment dat
3 min read
Kubernetes - Create ConfigMap From YAML FileA ConfigMap is a dictionary consisting of non-confidential data. Its primary role is to keep the configuration separate from the container image. ConfigMap can be created in different ways. This article will cover the declarative approach to creating ConfigMap from the YAML file. Example: apiVersion
1 min read
Kubernetes - Config Map From DirectoryPre-requisite:- Kubernetes Software deployment, scalability, and administration are mostly automated using Kubernetes, an open-source container orchestration framework. K8s is another name for Kubernetes. Kubernetes was initially developed by Google and is now managed by the Cloud Native Computing F
2 min read
Kubernetes - Injecting ConfigMap as FilesPre-requisite:- Kubernetes The automated deployment, scaling, and administration of software using a system called Kubernetes, an open-source container orchestration tool. K8s is another name for Kubernetes. Kubernetes was initially developed by Google and is now managed by the Cloud Native Computin
3 min read
Kubernetes - Injecting ConfigMap in PodsPre-requisite: Kubernetes Leveraging the open-source container orchestration engine Kubernetes to automate the deployment, scalability, and management of applications. Another name for Kubernetes is K8s. Google originally created Kubernetes, which is currently overseen by the Cloud Native Computing
3 min read
Scaling and Updating Applications
Kubernetes - Service DNS An open-source container orchestration system called Kubernetes is primarily employed for the automated deployment, scaling, and management of software. Another name for Kubernetes is K8s. Initially created by Google, Kubernetes is currently maintained by the Cloud Native Computing Foundation. Altho
11 min read
Additional Topics
What is Kubernetes API ?Complete GuideKubernetes API is an application that serves Kubernetes functionality through a RESTful interface and stores the state of the cluster via HTTP. Users can directly interact with the Kubernetes API or via tools like kubectl. It supports retrieving, creating, updating, and deleting primary resources vi
14 min read
Kubernetes - Taint and TolerationA pod is a group of one or more containers and is the smallest deployable unit in Kubernetes. A node is a representation of a single machine in a cluster (we can simply view these machines as a set of CPU and RAM). A node can be a virtual machine, a physical machine in a data center hosted on a clou
6 min read
Kubernetes Resource Model (KRM) and How to Make Use of YAML?Here we will explain how YAML can simplify system management and automation of most processes so that Kubernetes is a convenient working system. Basic Kubernetes Models: KRM and Everything-as-CodeAccording to Kubernetes co-founder Brian Grant, Kubernetes is very convenient thanks to the Kubernetes R
6 min read
Installing Private Git Server on K8s Cluster with Gitea and AKSIn this article, we are going to install a self-hosted Gitea server on top of Azure Kubernetes Service with Helm and set up a git repo. Having a private Git server might be beneficial these days. Gitea is a community-managed Git-compatible lightweight code hosting solution written in Go. It is publi
4 min read
Enable Remote Debugging For Java Application Deployed in Kubernetes EnvironmentDuring Development, developers have to debug their applications to resolve code problems. In order to debug a java application which is deployed on remote machine in a Kubernetes cluster, first developer has to do some steps to enable its application ready for debugging. Below are the manual steps t
2 min read
How to Enable JMX For Java Application Running in the Kubernetes Cluster?Many times we want to monitor our application's CPU utilization, background thread behavior, and most importantly memory consumptions for tasks that deal with loads for data (500MB - 1GB) or much more data. Such monitoring helps to find which operation is causing heavy CPU or Memory utilization and
3 min read